SE6100-CGB battery 6V10AH - Safety Fire Emergency Battery for Safety Fire Emergency System

AGM Valve Regulated Sealed Lead Acid Battery (6V 10Ah)

Features:

• AGM Valve Regulated Sealing Technology: Leak-proof design for safe and worry-free operation.

• Wide Operating Temperature: Performs well in a range of environments from -15°C to 45°C (best at 20±5°C).

• Flexible Placement: Can be used upright or lying down for easy installation.

• Low Maintenance: Sealed design minimizes water loss, eliminating the need for topping up with distilled water or electrolyte.

• Low Self-Discharge Rate: Holds its charge well even during storage.

Specifications:

• Nominal Voltage: 6V

• Capacity:

• C20: 10Ah (5.25V, at 25℃)

• C10: 9Ah (5.25V, at 25℃)

• C3: 7.5Ah (5.25V, at 25℃)

• C1: 6Ah (5.1V, at 25℃)

• Dimensions: 151mm x 50mm x 95mm (total height 101mm)

• Terminal: FO-02 / FO-03 / FO-12

• Internal Resistance: Approx. 10 mΩ (25℃)

• Max Short-Duration Discharge Current: 300A (25℃)

• Weight: Approx. 1.61kg

Charging:

• Using Mode | Charging Voltage | Temperature Compensation | Max Charging Current*---|---|---|---|

• Standby Use | 2.275±0.025V/cell (25℃) | -3.3mV/℃/cell | 3.0A

• Cyclic Use | 2.45±0.05V/cell (25℃) | -5mV/℃/cell | 3.0A

Storage:

• Store in a dry, clean, well-ventilated warehouse away from direct sunlight, heat sources (over 1m distance), and toxic gases/organic solvents.

• Recharge every 6 months at temperatures below 25°C. (Information on storage times at higher temperatures not shown).

• Recharge method: constant voltage 2.45±0.05V/cell (25℃) with maximum charging current of 3.0A for 15-20 hours. Temperature compensation coefficient: -5mV/℃/cell.

• Batteries should be recharged within the storage life or before using.

Charging methods: maximum charging current 3.0A, constant voltage 2.45±0.05V/cell (25℃); Charging time: 15~20h; Temperature compensation coefficient: -5mV/℃/cell.