CB6100-CGB battery6V10AH-Suitable for precision instruments

■ FEATURES

- AGM valve regulated sealing technology;

- High strength ABS material for container & lid;

- Wide temperature scope of application (-15~45℃);

- Best temperature of application (20±5℃);

- No leaking, safe and reliable;

- Standing or lying down for use, convenient for transport and installation;

- High sealed reaction efficiency, little water loss, no need to add distilled water or electrolyte, simple to use and maintain;

- Low self-discharge rate.

■ SPECIFICATIONS

Nominal Voltage: 6V

Capacity:

- C20: 10Ah (25℃, 5.25V)

- Nominal Capacity (C20): 10Ah (25℃, 5.25V)

- C10: 9Ah (25℃, 5.25V)

Dimension:

- Length: 151mm

- Width: 50mm

- Height: 95mm

- Total Height: 101mm

Internal Resistance: Approximately 10 mΩ (25℃)

Max Short-duration Discharge Current: 300A (25℃)

Weight: Approximately 1.73kg

Terminal: FO-02 / FO-03 / FO-12

■ CHARGE

Using ModeCharging VoltageTemperature CompensationMax Charging Current

- Standby Use: 2.275±0.025V/cell (25℃)-3.3mV/℃/cell3.0A

- Cyclic Use: 2.45±0.05V/cell (25℃)-5mV/℃/cell

■ STORAGE

- Batteries should be stored in a dry and clean warehouse with a good air exchange system. They should be kept away from direct sunlight and heat sources (such as radiators, with a distance of more than 1m). Batteries should also be kept away from any toxic gases and organic solvents.

- If the ambient temperature is less than 25℃, the longest storage life is 6 months. However, if the ambient temperature is higher, the longest storage life varies as specified in the chart below:

  Storage Temperature (℃)Storage Time (Month)

  - ≤256

  - 26～333

  - 34～401

- Batteries should be recharged within the storage life or before use. The charging method involves a maximum charging current of 3.0A, constant voltage of 2.45±0.05V/cell (25℃), a charging time of 15~20 hours, and a temperature compensation coefficient of -5mV/℃/cell.